Ai C30 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
IMPORTANT! -30°C/-22°F ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).
C30 circulating chiller features:
|Electrical requirements||220V 60Hz 1-PH 9A, 1990 watts|
|Compressor|| Make: Panasonic
Power: 208-230V 60Hz 1-Phase
Number of compressor: One
| Cooling capacity
environment is 25°C/77°F)
| @ 32°F/0°C: 2800W
@ 14°F/-10°C: 1800W
@ -4°F/-20°C: 1000W
@ -22°F/-30°C: 500W
|Reservoir|| Capacity:30 liters or 8 gallons
Dimensions: 23 x 15 x 7" (WxDxH)
Material: Type 304 stainless steel
Chilling fluid connection: 1/2" hose barb x 2
|Recirculating pump|| Pump type: Centrifugal
Output: 100 watts
Pumping speed: 5.3 gallon/min or 20L/min
Maximum head: 20 feet or 6 meters
Pressure: 5.8 psi
|Coolant outlet pressure||Displayed on the built-in mechanical pressure gauge|
|Temperature controller|| Range: ambient to -30°C/-22°F
Accuracy: +/- 2°C
Type: Digital microprocessor PID controlled
Range: -30°C (-22°F) to Ambient
Display unit: Celsius °C
|Tempeature sensor type||Pt100|
|Housing||Powder coated type 42 stainless steel|
|Recommended coolant|| For 50°F/10°C or higher: distilled water.
Between 50°F/10°C and -22°F/-30°C: 50% ethylene glycol + 50% distilled water
|Built-in swivel casters||Four|
|Safety|| Compressor over-temp protection
Short circuit and ground protection
|Dimensions (WxDxH)|| Unit: 30 x 19.5 x 34"
Shipping: 38 x 25 x 45"
|Unit weight||220 lbs|
|Recommended for||Ai SolventVap 20L rotary evaporators and 10L jacketed reactors|